The fruit cutters are perfect for a pair of unusual earrings. The measurements refer to the inside dimensions. The cutters are available as a set or individually. The color of the clay cutters depends on what we currently have in stock.
Strawberry: 2.5 cm long Avocado: 3.2 cm long Peach: 2.5 cm high
We design and print the cutters from PLA ourselves. The filament has been certified by the FDA as food-safe, so it is safe to come into contact with food.
When making the molds, we made sure that they are high enough at 1.4 cm so that the clay is not touched when cutting them out. The thicker edge at the top makes it very easy to pull out and as the thin cutting edge is only printed with one line, the result is very clean and no clay sticks to the mold. It is very easy to clean with a wet cloth.
As we print our molds in three layers (each with a thickness of 0.4 -06 mm at the bottom, 1.7 mm in the middle and 4.8 mm at the top), they are extremely stable. Nevertheless, they should not be exposed to direct sunlight and only moderate pressure should be applied when cutting them out.
For a clean result, the mold can be coated with cornstarch or baking powder beforehand and then pressed onto the clay with even pressure. The mold should then be turned to the right and left in small movements.
